Click here to view high resolution photos Trailer or Tractor can be purchased separately VIN for Peterbilt: 1XP4D49XOCD138680 VIN for Trailer: 1KKVD52263L211475 Original Build Cost $1,247,000! “State of the Art” 6 Car Semi-Trailer

53' Custom Vehicle Transporter - 6,000 lb Capacity Liftgate, Adjustable Interior Decks, Genset, Air compressor, Nitrogen Storage Racks, Tools/Parts Cabinets, Closed Storage, Custom Driver’s Lounge/Changing area, Air Conditioning, Closets, 110/220, Interior/Exterior Lighting, 76’ Awning, Observation Deck Etc.

Peterbilt 587 Canepa Design Special Edition Fully Optioned Tractor - Canepa Design Aero composite bumper/spoiler, side skirts, upper/lower fairing extensions, auxiliary fuel storage, Speedline wheels Etc. Concept Transporters has never been known for building the average, the minimum, or the basic. When Bruce Canepa founded the company, he envisioned bringing his design skills and intense attention to detail to the trucking/transportation industry. 35 years working with major automotive and truck manufacturers, clients asking for projects that few could undertake and bring to reality, Concept Transporters has become synonymous with forward thinking, design, quality, ingenuity, and utility. The vision of this project started with a Peterbilt 587. Bruce wanted to create the ultimate transporter to fulfil the demands of transportation for specialty vehicle to race or show events. With a complete “Canepa Design” aero kit including front bumper, full-length sides skirts and front spoiler, along with a lowered front suspension, give the Peterbilt a unique and stylish look. In addition, the Peterbilt also received upper and lower composite fairing extensions, which allow for access to the back of a custom sleeper storage compartment. The tractor also includes DOT aluminum race fuel tanks with pumping system with a capacity of 255 gallons. On the exterior, the Peterbilt received the Canepa Design Monochromatic paint option which includes side rear view electric mirror assembly, CB antenna bases, door handle assemblies, cab grab handle bases, bumper/spoiler assembly, side skirts, etc. Graphite metallic finishes including front grill insert and hood side air vent screens. To finalize, the Speedline European wheels were powder-coated in graphite metallic along with the wheel hub covers. Behind the Peterbilt, is a “state of the art” Concept Transporter 6 car semi-trailer. Featuring a 6,000lb hydraulic liftgate, Concept interior ramp system with hydraulic rear ramp for larger cars, driver’s lounge, air compressor package, observation deck, enclosed awning package (including awning extensions to end of liftgate and tractor), and others listed in detail bellow. Complete, ready to go, and loaded with features to make any automotive event as easy and enjoyable as possible. Peterbilt 587 (Factory Specifications) Description Model 587 Frame & Equipment 10-3/4in Steel Rails 355-384in Aluminum Frame Rail Crossmembers Ipo Steel Custom Wheelbase Fifth wheeI Bolted IPO Huck Fastened EOF Tractor Tapered with Xmbr Omit Rear Mudflaps and Hangers Hogebuilt Stainless Steel Quarter Fenders Holland FW31 Fifth Wheel, No Lube Top Plate Fifth Wheel Setting Behind C/L Bogie 18in LH Fifth Wheel Release Kingpin Air Release System, Cab Mounted Controls 9.4-10.4in Fifth Wheel Height, Holland 32 or 36 In Air Slide No Access Package or Deck Plate Desired Front Axle & Equipment Peterbilt Front Air Leaf, Shocks 13,200 lb Power Steering TRW THP60 Power Steering Reservoir Frame Mounted PHP10 Aluminum LMS Hubs Dual ·Haight Control Valve 5" dropped axle Dana Spicer Wide Track IPO Std, Front Axle Air Disc Front Brakes Rear Axle & Equipment Dana Spicer DSH40 40,000 lb, High Performance 40 PHP10 Alum LMS Hubs Long Stroke Parking Brakes, Drive Axle(s) Bendix Smart A TC Traction· Control Rear Brake Camshaft Reinforcement Anti-Lock Braking System (ABS) 454M Synthetic Axle Lubricant Ail Axles Air Disc Rear Brakes Ratio 3.25 Rear Axle Peterbilt Low Low Air Leaf 40,000 lb (4) Heavy-Duty Gabriel Truckmaster Shocks Dash Mounted Dump Valve with Indicator Light Engine & Equipment ISX15600/2000 2050@1200 CARB Engine Idling Compliance 160 Amp Alternator, Long Brush Immersion Type Pre-Heater 110-120V PACCAR 12V Starter 4 PACCAR Premium 12V Dual Purpose Batt 2800 CCA Intellitec Big Boy Battery Disconnect Switch LVD (Low Voltage Disconnect) 18.7 CFM Air Compressor lntebrake (Furnished on Engine) High Efficiency Fuel/Water Separator, Heated 12V Engine Protection Shutdown High Efficiency Cooling System (1) Air Cleaner Firewall Mounted Exhaust Single Horizontal LH Transmission & Equipment FO20E318B-MXP Ultrashift Plus SPL250HD-XL Driveline With Two Midship Bearings SPL 170-XL lnteraxle Driveline Alum Transmission Bell Housing ipo Iron Chrome Transmission Shift Lever Remote Lube Hoses for Release Bearing and Cross Flex Hose for Release Bearing and Cross Shaft Lub Remote Lube Hose For Release Bearing Solo Clutch Ipo Easy Pedal Air & Trailer Equipment Bendix AD-IS Air Dryer with Heater Nylon Chassis Hose Painted Aluminum Air Tanks Clear Outside Frame of Ali Air System Components Clear Outside Frame of All Air System Components Trailer Hand Valve (Self Returning) Hose Tenna Mounted on LH Rail Chroming of Hose Tenna 12ft A&E Lines Coiled & Two 7-Way Plugs A&E Connections BOC/BOS with Hose Tenna Locate A&E Connections BOC/BOS as far rearward Tires & Wheels FF: MN 16ply 27 5/80R22.5 XZA-3 RR: MN 14ply 275/80R2.5 XDA-5 Code-rear Tire Qty 08 FF: Petertbilt 886677 LvL 1 22.5x8.25 Alm Whl RR: Peterbilt 886677 LvL 1 22.5x8.25 Alm Whl Code-rear Rim Qty 08 FF: Polished Wheels RR: Wheels - Tandem Drive 26in Aluminum 150 Gallon Fuel Tank RH BOC Location RH BOC 150 Gallon Location LH BOC 150 Galion Fuel Tank Fill Forward Locate BOC Fuel Tanks Forward As Far As Possible (2) Shut-Off Valves On Fuel Supply Lines Locking Fuel Tank Cap{s) DEF Tank Mounted RH BOC DEF Tank Aero Battery Box, Bumper, Cab & Equipment Alum Battery Box LH U/C, Polished Door & Step Rubber Battery Pad in Bottom Of (1) Battery Box Alum Tool Box RH U/C, Polished Door & Step Molded Aero Bumper One Piece Painted Chassis Aero Fairings Alum Cab Long Length BBC Fiberglass Hood SBFA Premium Length High Roof Sleeper w/Premium Thermal Insulation Pkg Premium Length High Roof Second Bunk in High Roof Sleeper TV Package in Sleeper - Passenger Side Additional 12 Volt Power Driver Side Partitions For Upper Cabinets Driver Side Lower Office Cabinet w/Refrigerator-Incls Middle Gear Strap, TV Type - Driver Side Cabinet Atlas 80 Driver Seat Atlas 80 Passenger Seal Arm Rest RH Only Driver Seat Arm Rest LH Only Passenger Seat Air Ride Driver High Back Driver Air Ride Passenger High Back Passenger UltraLeather Driver (Atlas Only) UltraLeather Passenger (Atlas Only) Power Door Locks Both Doors Leather Steering Wheel ipo Standard Saharan Tan Interior Privacy Curtain Around Windshield Woodgrain A & B Dash Panels IPO Charcoal Exterior Transition Grab Handles One Piece Curved Windshield Lower sleeper Side Windows w/Screen (Opening) Combo Fresh Air Heater/Air Conditioner Peterbilt Comfort Control - Sleeper Outside Sunvisor Painted Composite Aero Bright Mirrors Ea Side Heated and Motorized (1) Air Horn 15in Painted ConcertClass Satellite Audio System with CD CB Radio w/Weatherband, (2) Raml Antennas XM Satellite Radio Service Provider Plug-In Auto Reset Circuit Breaker Removable Bugscreen Behind Grille Peterbilt Electric Windshield Wipers Xantrex 1000 Watt Inverter 12 Inch Sleeper Extender w/6 Inch Rubber Flap Triangle Reflector Kit Shipped Loose 5 Lb 3A:40bc Fire Extinguisher Cab Mounted Trans Temp Gauge Main Axle Temp Gauges Tandem Drive Oil Temperature Gauge - Engine Air Application Gauge Air Restriction Gauge On Dash Air Restriction· Indicator - Filteiminder Mounted Buzzer on Air Suspension Dump Valve Manifold Pressure Gauge Peterbilt Analog Electric Clock Dash Mounted Digital Alarm Clock Sleeper Mounted Suspension Pressure Gauge (3) Additional Electric Rocker Switches Main Instrumentation Panel/Graphics Display Omit Fan Clutch Override switch Custom Nameplate Headlights Composite Fender Mounted w/lntegral Marker Lights (5) Aero LED Fog Lights (2) Peterbilt Daytime Running Lights Trucklite 40242R Stop/Turn/Tail (1) Switch & Wire F/O Loadlight Paint Paint Color Selection within Paint Deck (1) Color Dupont Two Stage -Cab/Hood/Slpr Miscellaneous Premium Length Slpr / Premium Interior (PP) Peterbilt Manufacturer Price: $216,297 (MSRP)

Peterbilt 587 Canepa Design Special Edition Options •Canepa Design Aero front composite bumper/spoiler •Canepa Design Aero full length composite side skirts with rear access integrated steps •Canepa Design sleeper upper composite fairing extensions •Canepa Design sleeper lower composite fairing extensions—hinged/opening feature for access to back of sleeper storage compartment (access from driver and passenger side) •Canepa Design monochromatic paint option—side rear view electric mirror assemblies, CB antenna bases, door handle assemblies, cab grab handle bases, bumper/spoiler assembly, side skirts, etc. Graphite metallic finishes including front grill insert and hood side air vent screens •Miscellaneous Back of sleeper storage box including rollup door access driver/passenger side, interior shelf, and race gas fuel pump system, (height 60’, with 36’. Length 67.5) Full width/length aluminum deck plate behind sleeper including frame covering to back of chassis (powder coat graphite metallic) Lowered front suspension “King” gas shock assemblies Speedline European wheels (powder coat graphite metallic) Wheel hub covers (graphite metallic finished) with gloss black lug nut covers “Race fuel” auxiliary tanks (2), 255-gal capacity Canepa Special Edition Options $205,000 Total Price Canepa Edition Tractor: $421,297

Concept “6 Car / Race Support” Semi Trailer Rivetless 53’ Drop Tandem-axle Trailer: VIN:1KKVD52263L211475 • 36" king pin setting. • 42' center of king pin to center of rear axle. • Coupler height 49-1/2". • 13'-6" overall height. • 144" fifth deck. (Interior length) • 106" floor to ceiling forward of drop. • 143” floor to ceiling rear of drop • 138" floor to ceiling from wheel box to rear. • 4" steel 1-beam floor sills on 16" centers. • Neway air-ride suspension. • Rockwell 3" dropped axels. • Meritor WABCO anti-lock brakes: (4 sensors-2 modules) 16-1/2" x 7" brakes. • Low profile 22.5” 16 ply Goodyear radial tires. • 1-3/8" ship-lapped laminated hard wood floor. • Special radius front corners, with glad-hands and plug assembly to roadside. • Plastic covered rear roll-up door with secondary side seals. • .040 One-piece stretched aluminum roof. • Steel roof bows on 24" centers. • .90 smooth side aluminum paneling. • Mud flaps. • 14-gauge galvanized logistic posts on 16" centers, double slotted Concept Custom Exterior Trim Package: • Concept custom aluminum tandem fenders. • Custom rear tapered transition panel from fenders to rear of trailer: radius bottom edge, covers full side rail extrusion. • Concept custom aluminum quarter fenders. • Rivetless quarter panel extension with supporting framework: Curbside quarter panel opens to access storage compartment between landing legs. • Custom formed full length side rail cover: formed with radius on bottom edge, angled at drop and shaped over wheelbox opening Concept Custom Side Access Double Door: • 60" x 84" double door. • 10-ga. formed structural steel perimeter doorframe inside trailer wall. • 12-ga. Stainless steel to door header. • Structural reinforcement added to cross members and floor in door area. • Composite door construction. • Rivetless interior and exterior construction. • Brushed stainless steel door perimeter trim. • Lightweight 14-ga. formed steel door structure. • Steel door frames, powder-coated. • .050 5052-H32 pre-painted white aluminum exterior panel. • .050 5052-H32 pre-painted white aluminum interior panel with extruded aluminum edge molding. • All steel surfaces primed for rust prevention. • Recessed polished stainless steel Furgocar lockable door latch with concealed hardware. • Corner mounted door seal. • Stainless steel continuous hinge with internal compression seal. • 12-ga brushed stainless steel threshold and entry frame. Concept Deluxe Nose Mount Generator Package: • Complete custom built nose mount enclosure: Rivetless exterior, custom radius front corners, no exterior side vents, box flush with top of trailer. • Steel tube frame construction, painted black. • Deluxe sound suppression package: Complete enclosure, full generator compartment back wall, trailer front wall insulation. • (4) Aluminum doors with lockable latches and full length vinyl covered stainless steel hinges. • 20kW water cooled diesel generator, mounted on top shelf. • Remote start panel with gauges mounted inside trailer. • Custom built aluminum shroud to duct radiator air up through the top of the enclosure. Expanded metal screen and integrated water drain. • Custom built generator exhaust. Heat wrap insulation installed on complete exhaust system. • Dedicated generator start battery with custom built battery enclosure and tie-down. • 110V “forced air” squirrel cage fan blower. • Approximately 70 gallon diesel fuel tank with sight gauge. • Provisions for A/C evaporator and Air Compressor on middle shelf. Concept 6,000 lb. Hydraulic Liftgate: (New Style) • Custom platform with integrated radius corner caps. • 144" 3/16" 6061-T6 smooth aluminum load surface. • Complete load surface sprayed with rubberized truck liner. (Light Grey in color.) • Lightweight steel frame platform construction. • Rivetless .090 aluminum exterior skin. • (6) Recessed polished stainless steel LED taillights. • Provisions for (2) license plates. • Custom built slide-out extension for loading low ground clearance cars. • New style connection for tail-light to trailer connection. Concept Custom Interior Ramp System: • Full length ramps from rear of trailer to drop. • 17ft Rear section of ramps: 5500lb capacity. • Remaining section to drop: 3500lb capacity. • Lightweight aluminum tube frame construction. • Formed aluminum load surface. • Installed at a height of 27-1/2” from main floor to top of ramp. • Aluminum tie-down track on inside vertical edge of ramps. • Designer rubber load surface. • Custom built stainless steel access doors under ramp system. Doors to hinge up, then slide in under load surface. Nitrogen bottle rack system. Concept Custom Hydraulic Deck: • 17’-0” long platform at rear of trailer. • 3500lb car capacity. • Deck lowest position to be even with fixed deck and travel up approximately 36”. • “Wireless” remote operation. • Lightweight steel frame platform construction with open center. • Riveted 3/16” aluminum load surface. • Rivetless brushed stainless steel under ramp sections on bottom surface. • Hydraulic cylinders and vertical support tubes recessed into walls of trailer. • Power unit from liftgate used to control deck. Concept Custom Fixed Deck: • Full length ramps from front of hydraulic deck to drop. • 3500lb car capacity. • Installed at a height of 56-3/4” from top of deck to ceiling. • Lightweight steel construction. • No lower angle supports, open full width under ramp system. • Open center construction. 27” wide ramps on each side with center open around supporting framework. • Powder-coated gloss white finish. • Aluminum tie-down track on inside vertical edge of ramps. Concept Custom Adjustable Fold-Up Deck: • From drop of fifth deck to 48” from front of trailer. • 3500lb car capacity. • Installed at a height even with adjustable ramp system. • Composite aluminum and steel construction • Powder-coated gloss white finish. • Sections to fold-up against wall and lock into place. • Aluminum tie-down track on inside vertical edge of ramps. Concept Custom Nitrogen Bottle Rack: • Integrated under lower ramp system rear of side access door. • Brushed stainless steel construction. • Store (4) “K” series nitrogen bottles and clearance for regulators on each bottle. • Complete nitrogen line system installed with (4) exterior outlets under curbside of trailer and one interior outlet near nitrogen bottle rack. • Coupler style • Ramp system to be open around nitrogen bottle rack: No doors on end or sides surrounding rack. Concept Custom Driver’s Lounge: • Front wall of fifth deck. • Clear anodized aluminum frame cabinet construction. • Laminate cabinet door faces. • (2) Wardrobe cabinets. • Small stainless steel sink and counter. • Mirrored stainless steel panel above sink. • Insta-hot hot water heater. • Fresh water tank, grey water, and water pump, all mounted in front wall custom enclosure. • Fresh water fill, grey water flush out, and grey water dump valves located at front of trailer exterior. • Dump tube storage tank mounted in custom storage compartment under fifth deck. • Water pump switch and water monitor panel mounted below sink inside base cabinet. • General storage cabinets. • Flat Screen TV and satellite system. • (2) Fold down benches for sitting: (1) along each wall. • A/C system. • Canvas wall separating drivers lounge and main trailer area. Zippered door in center. Concept Custom Deluxe Electrical Package: • All conduit concealed and hidden wherever possible. • 100A / 240V Main electrical panel mounted just inside side access door. • 100A Transfer switch. • 50A / 240V Shore power connection. • 50A / 240V 25ft. Shore power cord (open connections on one end.) • (10) Corner mount fluorescent lights mounted in top corners of trailer: (5) per side, spaced evenly • 300W Inverter / Charger with remote panel. Inverter to power all fluorescent lights, some 110V outlets, and TV. Charger to maintain house battery bank. • 50A/ 120V Sub-panel for all “inverted” components. • House battery system: (4) Group 27 deep cycle marine batteries mounted in custom enclosure behind fender well on curbside of trailer. • Inverter mounted behind fenderwell on curbside next to batteries. • Complete 110/220V electrical system including all conduit, wires, and terminations for all of the following: o (1) 20A 220V outlet mounted near main electrical panel. o (6) 15A 110V single gang electrical outlets with weather proof covers mounted under curbside exterior of trailer. o (3) 15A 110V single gang electrical outlets installed along curbside interior of trailer. o (1) 15A / 110V single gang electrical outlet for TV. o (1) 15A / 110V single gang GFI outlet mounted near sink in driver’s lounge. o (4) 15A / 110V single gang outlets with weatherproof covers installed near top of trailer for awning fan electrical connection. Outlets switched at panel inside of side door. o (4) Custom 35W Metal Halide light fixtures mounted in recessed stainless steel enclosures on curbside of trailer. Ballasts for light fixtures mounted in corner mount light raceway. o (2) Custom 35W Metal Halide light fixtures mounted to top of screw deck columns for load lights. Ballasts for light fixtures mounted in corner mount light raceway. o (1) 220V switch and power supply for 220V liftgate pump / motor combination. o 110V power to A/C condenser and evaporator. o 110V switched power to air compressor. o 110V power to forced air blower in nose box. o 30A / 110V circuit for insta-hot hot water heater. o 220V and 110V power supply to ball-screw deck control and power circuits. • Complete 12V electrical system including all wires and terminations for all of the following: o (1) Main 12V fuse panel. o Remote solenoid master 12V disconnect with LED indicator light. o (1) 12V water pump. o (1) 12V water monitor system. o 12V circuit for satellite system. o (2) 12V powered roof vents with remote switches. Concept Custom Trailer Modifications: • Hydraulic landing leg system. 12V Power unit mounted between landing legs. 12V power supply to run off of house battery system. Warning light on trailer when legs are down. • Recessed track on main floor next to ramps full length, both sides. • Speedline aluminum wheels, powder-coat graphite metallic finish. • Black lug nut covers and graphite metallic finish axle covers. • Structural drop braces installed behind quarter fender panels. • 1” rigid foam insulation installed in ceiling. • 1” rigid foam insulation installed in walls. • Spray ceramic insulation on trailer roof in front of observation deck. • Spray ceramic insulation in walls on fifth deck. • White plastic insert panels between logistic posts. • Rubber flooring on full fifth deck. • (2) Rows of surface mounted tie-down track on floor next to walls from drop to front of cabinets on front wall. • Roll-up door hardware removed, chrome plated, and re-installed. • Full Rivetless pre-painted white aluminum ceiling. • Custom full brushed stainless steel trim package. Brushed stainless steel trim installed in trailer wherever necessary to cover trailer gusset plates, main drop plate, etc. • Custom removable aluminum stairs to fifth deck. Stairs to clip into place and allow access to fifth deck, yet removable to gain access under lower ramp system. • (2) 12V powered roof vents with remote switches. • Storage racks on side doors. • Clock on side door. • Cork board and dry erase board on side door. • (2) 8ft. long removable exterior T-slot mounted workbenches with support legs to bottom rail of trailer mounted on curbside of trailer. • All exterior lights converted to “clear lens” LED fixtures. Concept Custom Air Compressor Package: • 3HP Air compressor mounted middle shelf of nose box. • Air compressor modified for permanent mount installation. • (6) Exterior curbside air outlets under trailer. • (3) Interior curbside air outlets along wall. • Remote on/off switch located inside side access door. • Remote system gauge located inside side access door. • Fully automatic head pressure relief system to allow soft low amperage starts. Concept Custom Observation Deck: • 20 ft long x 8.5 ft wide. • Mounted at rear of trailer. • Additional structure added to roof of trailer. • 1-1/4” dia. fully polished stainless-steel tube frame construction. • All rails fold down on roof of trailer or store on roof of trailer. No frame members store inside trailer. • 5oz. grey Dacron sail cloth center ridge canopy. Concept Custom Collapsible Observation Deck Access Stairs: • (2) Separate stairs: (1) from ground to liftgate platform, (1) from gate to roof of trailer. • Aluminum and stainless steel construction. • Stairs collapse flat for storage. • 1-1/4” dia. fully polished stainless steel handrails. • (2) Rubber rollers at base of stairs. Concept Custom Awning Package: • 22ft. projection x 51’ 8-3/4” x 86 eve height* (Total awning length = 76 ft). • Lightweight anodized aluminum frame construction. • Aluminum and stainless steel mounting hardware. • Lightweight radiused corner rectangle rafter poles with spinnaker ends. • High quality water resistant grey 5oz. Dacron sail cloth main canvas. • Custom zip-off bead track strip for easy set-up and tear-down. • Zippered rafter pole pockets. • Buckle straps on all horizontal poles. • High quality water resistant grey 5oz. Dacron sail cloth full enclosure walls (with black vinyl soil skirts.) • Zippered vertical posts pockets. • (2) Custom end vents (1) each end. End vents to extend to the mid-span pole on the awing frame and match the profile of the awning end. • (5) Rain drains, (1) each bay. • Heavily reinforced at chafe and stress areas. • Complete black vinyl bag set: including (1) main canvas tube bag and (1) standard canvas bag for side walls and observation deck canopy. • Complete tie-down kit: includes spikes, posts, ropes with brass clasps, hammer, and storage pouch with bag. • Custom rafter pole storage brackets to store all rafter poles below second level deck. • Custom pole storage provisions. All poles to store between landing legs, under nose box, under deck, and on walls. No poles store in bags. • Custom electrical provisions in (4) center rafter poles. • Electrical pigtails to connect rafter poles to trailer. • (4) Custom mounted fans, rafter pole mounted lighting. • (1) Custom built fan storage rack for transporting fans. *Concept Custom Awning Front Extension Package: • 22ft. projection x 12ft. long. • Hip roof style construction • Lightweight anodized aluminum frame construction. • Aluminum and stainless steel mounting hardware. • Lightweight radiused corner rectangle rafter poles with spinnaker ends. • High quality water resistant grey 5oz. Dacron sail cloth main canvas. • Zippered rafter pole pockets. • Buckle straps on all horizontal poles. • High quality water resistant grey 5oz. Dacron sail cloth full enclosure walls (with black vinyl soil skirts.) • Zippered vertical posts pockets. • Heavily reinforced at chafe and stress areas. • Custom rafter pole storage brackets to store all rafter poles below second level deck. *Concept Custom Awning Rear Extension Package: • Mirror image of front extension. • 22ft. projection x 12ft. long. • Hip roof style construction • Lightweight anodized aluminum frame construction. • Aluminum and stainless steel mounting hardware. • Lightweight radiused corner rectangle rafter poles with spinnaker ends. • High quality water resistant grey 5oz. Dacron sail cloth main canvas. • Zippered rafter pole pockets. • Buckle straps on all horizontal poles. • High quality water resistant grey 5oz. Dacron sail cloth full enclosure walls (with black vinyl soil skirts.) • Zippered vertical posts pockets. • Heavily reinforced at chafe and stress areas. • Custom rafter pole storage brackets to store all rafter poles below second level deck. Concept Custom Exterior Paint: • Light gray, including top and bottom rails. Concept Custom Accessory Package: • Wheel chalks for use in loading and unloading cars. • (40) Ancra tie down clips. • (30) 2” Adjustable ratchet straps: 1ft. fixed length, 8ft. adjustable. Blue in color with no logos on straps. • (20) 1” Adjustable ratchet straps. • (20) E-to-D straps. • (30) Axle straps with protective sleeve. Total Price $867,000